Banking Exchange Magazine Logo

That chip-card wait may not be so bad

EMV transaction times can vary widely—depending on circumstances

There’s more to EMV card delays than slow connections and other technical matters, suggests Underwriters Laborartories research. There’s more to EMV card delays than slow connections and other technical matters, suggests Underwriters Laborartories research.

In the year-plus interval since the liability shift went into effect for point-of-sale EMV cards, much has been related anecdotally about the increased amount of time per transaction this has caused.

It turns out that this is a nuanced issue. Underwriters Laboratory mounted a scientific study to determine empirically how long chip-enabled transactions actually take at the point of sale. Its testing showed that the average transaction time was approximately 11 seconds—with 4.4 seconds as the fastest recorded and 22.6 seconds as the slowest.

But that’s only part of the story.

How fast is fast? How slow is slow?

“There are multiple reasons why a transaction is typically slower in the United States than we observe in elsewhere,” says Sherif Samy, managing director, Transaction Security Operations, at UL, in an interview with Banking Exchange. “The first question we need to ask: ‘Is that a problem?’”

It depends on the nature of the business, he explains:

“If you are in a fast-paced, high-volume market, [a slow] speed of transaction will be a detrimental part of it. If you are in a merchant environment and you would like a dialog with the consumer, then it is less critical. We can’t generalize EMV speed of transactions. We need to look at it per market segment.”

Nonetheless, Samy says, the U.S. has a long way to go for full EMV adoption, an effort that likely will take several years. UL has been involved with EMV migrations in a number of different countries, he says, and it has taken “anywhere between five and seven years to reach a critical mass” in those places.

About 30% of the U.S. merchant population is equipped with chip-enabled terminals, according to the latest figures from MasterCard. Meanwhile, it is estimated that about 74% of credit cards will have been issued with chips by the end of 2016, up from 42% in 2015, according to Javelin.

What slows things down

UL’s research identifies three main pain points that contribute to slowing down transaction times, Samy says:

Many terminals in the U.S. still rely on old-fashioned dial-up connections.

“This is an infrastructure technology that is slower than newer technologies,” he says. “Replacing and ‘reterminalizing’ a market, adding different mechanisms, takes time.”

Unlike in other parts of the world, U.S. merchants generally require more conversation or more actions by the consumer during a given transaction.

These include asking customers to choose debit or credit, whether they want a paper or digital receipt, whether they’d like to contribute to some charity, and so on.

“This slows down the EMV transaction a little,” Samy says.

EMV coding in use now could be improved.

Eventually, says Samy, the industry “will see a second release of EMV implementation in the market that is more optimized as experience grows in this market, and companies like UL push for more best practices in the market.”

Why merchants still lag in U.S.

Javelin, in two recent reports, provides some reasons for merchants’ slow adoption of EMV at point of sale locations. These include: inconveniencing customers, software integration, and completing EMV terminal certification.

For small retailers in particular, the barriers to adoption have been the cost of switching out terminals, new hardware requirements, and security concerns.

One aspect of Javelin’s conclusions in these two reports point to retailers turning to different payments strategies, most notably the use of mobile, contactless EMV technologies such as those found in digital wallets.

“With EMV disrupting the shopping experience, retailer mobile apps are experiencing the perfect storm,” says Michael Moeser, director of payments, Javelin. “Major retailers are taking advantage of this opportunity to capture consumer attention to move customers to retailer mobile application as alternative to lengthy EMV process.”

Contactless EMV in offing

UL’s research also sheds light on contactless EMV, in which a consumer waves or taps a mobile device near or on the point-of-sale terminal. Brand specifications for this technology require a tap to execute in less than half a second. UL notes that retailers in the Canadian and Australian markets have already largely migrated to contactless EMV, and that the U.S.s market likely will gradually pick up.

There are security issues involved with contactless EMV that have to be considered, and, again, they are nuanced.

“Security is related to what you are trying to protect. If you are in an environment where you are buying high ticket items, like a flat screen television, you don’t want to do that with a contactless transaction,” Samy says. “If you are in an environment where you are buying a coffee, who is going to steal a coffee? So you can afford to go with a Starbucks model of having QR codes or contactless transactions. It depends on your risk appetite and what you are trying to protect.”

Adding to this point, Celent’s Zilvinas Bareisis, senior analyst, says in a recent blog: “While the consumer adoption of various contactless pays, such as Apple Pay and others, has yet to set the world on fire, perhaps they will end up giving another reason for merchants to invest into chip terminals.”

John Ginovsky

John Ginovsky is a contributing editor of Banking Exchange and editor of the publication’s Tech Exchange e-newsletter. For more than two decades he’s written about the commercial banking industry, specializing in its technological side and how it relates to the actual business of banking. In addition to his weekly blogs—"Making Sense of It All"—he contributes fresh, original stories to each Tech Exchange issue based on personal interviews or exclusive contributed pieces. He previously was senior editor for Community Banker magazine (which merged into ABA Banking Journal) and for ABA Banking Journal and was managing editor and staff reporter for ABA’s Bankers News. Email him at [email protected].

back to top


About Us

Connect With Us



Banking Exchange Interview with
Rachel Lewis of Stock Yards Bank

As part of the Banking Exchange Interview Series we and SkyStem are proud to present our interview with Rachel Lewis, Assistant Controller at Stock Yards Bank & Trust.

In this interview, Banking Exchange's Publisher Erik Vander Kolk, speaks with Rachel Lewis at length. We get a brief overview of her professional journey in the banking industry and get insights into what role technology plays in helping her do her work.


This Executive Interview is brought to you by:
SkyStem logo